![]() Slide the directional control stick to the right and the entire body of the drone will slide to the right. Slide the directional control stick to the left and the entire body of the drone will slide to the left. Slide the throttle stick to the right and the nose of the drone will turn to the right. Slide the throttle stick to the left to turn the nose of the drone. Push the directional control stick downwards and the drone will tilt upwards. Push the directional control stick upwards and the drone will tilt downwards. Pull the throttle stick downwards and the drone will descend. Push the throttle stick upwards and the drone will ascend. you will grow more comfortable with the natural motions required during flight and you will learn to react more rapidly to unexpected circumstances. By simulating the use of the remote and both sticks. Practice using the throttle stick and the directional control stick (see below).ģ. Make sure that it is resting on a secure. ![]() read through these instructions many times and practice handling the remote control until you feel completely comfortable and ready.ġ. make sure to read these instructions carefully before flying. If you have never used a drone before and you are not an experienced pilot. The motor will stop and your drone will be locked in place. pull the throttle stick all the way down and hold it down for approximately 3 seconds. push the throttle stick all the way up and the pull it back to its mid-point and your drone will be unlocked. Do not calibrate near large sheets of metal.do not carry ferromagnetic materials such as keys or cell phones. Do not calibrate your drone in areas where there are strong magnetic fields.When you see green lights shining solidly. Turn the head downwards and rotate your drone vertically. while the lights on the back legs of your drone will solidly shine green The lights on the front legs of your drone will solidly shine red. spinning it in a clockwise direction for 3 revolutions. Press the geomagnetic calibration button on the remote control. make sure your drone is placed on a flat. The aircraft compass calibration allows your drone to be tracked over GPS. and the LED lights on the front legs of your drone will turn solid red to indicate that your drone's internal gyroscope is calibrated. The LED lights on the rear legs of your drone will turn solid blue. The LED lights on the front legs of your drone will turn red and start blinking rapidly while synchronizing. The LED lights on the rear legs of your drone will turn blue and green and start blinking rapidly. Pull the throttle stick and the directional stick all the way down and to the left simultaneously. When the LED lights on the rear legs of your drone are solid green and the LED lights on the front legs of your drone are solid red then your drone is in GPS mode.Ĭalibrating Your Drone’s Internal GyroscopeĬalibrate your drone's internal gyroscope to ensure smooth and balanced flight. When the LED lights on the rear legs of your drone are solid blue and the LED lights on the front legs of your drone are solid red then your drone is synchronized with your remote control and ready to fly. Pull the throttle stick all the way down and then push it all the way up. ![]() follow the calibration steps below in order to prepare your drone for flight.Ĭalibrating Your Drone with Your Remote Control Once your drone and remote control are powered on. slide the ON/OFF switch on the bottom of your drone to the ON position. Once your battery is fully charged it can be inserted directly into the battery slot on the underside of your drone.Ĭalibrating Your Drone (Preparing for Flight) he power switch of quadcopter must be turned off.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |